Please note this product is NOT designed to replace factory HID or LED fog light bulbs (please check your factory light bulb type before ordering).
Nokya LED Fog Light Bulb Conversion Kits provide excellent quality with greatly enhanced visibility, and energy savings as well! The direct replacement bulbs are designed to the same shape as your stock bulbs, allowing them to fit directly. Nokya's construction on these LED bulbs are top-notch, and the LED's are placed in a way that maximizes light output and distribution. The aluminum heatsink, coupled with the IP67 fan, ensure proper heat dissipation. To provide stable power, the circuit board is built with copper. With a long life, high light output, and a solid, efficient, and stable power output, this is truly the ultimate bulb you can purchase!
Important Public Road Usage Notes: It is a common misconception that aftermarket LED Kits like this one are road legal. To be clear, this product is not legal for public road use unless you have your fog lights retrofitted and approved for use with this kind of LED Kit (which would be costly). Aftermarket LED Kits like this one typically are reserved for off-road show use only.
- True LED conversion.
- Full conversion for your fog lights - comes with all wiring.
- Much better illumination and appearance compared to factory bulbs.
- Fill fit into stock or aftermarket fog lights (so long as they use the same bulb type). Keep in mind this does imply a road legal setup (see usage notes below).
- Water and weather proof.
- Available in two colors: 6000K White or Lime Yellow.
- Features LED technology - typically uses only about 15W of power!
- Up to 1600 lumens.
- Aluminum heatsink.
- 2 Year Warranty.
Other Fitment Information: If you have non-factory (aftermarket) fog lights, then you will have to choose one of the universal applications.Also, when replacing any bulbs that are also used as DRL's (Daytime Running Lights), it is recommended the DRL system be disabled on those bulbs (usually very easy to do by just pulling a single fuse). Not doing so may negatively affect the life of the LED kit since the LED bulbs are not designed to run at the low voltage level that the DRL system uses.
Note: Color temperature is a unit of measure for the color of light, and is not necessarily related to the heat of the light source.