A down arrow

Konig Hexaform Wheels for BMW 8 Series M8

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
BMW 8 Series M8
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(17x8, 5x112, 40mm, Matte Black) (Less Concave)
Universal
(17x8, 5x112, 40mm, Matte Bronze) (Less Concave)
Universal
(18x8.5, 5x112, 43mm, Gloss White) (Less Concave)
Universal
(18x8.5, 5x112, 43mm, Matte Black) (Less Concave)
Universal
(18x8.5, 5x112, 43mm, Matte Bronze) (Less Concave)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 BMW 8 Series M8 Fitment Help
For your BMW 8 Series M8 the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Extra Wheel Size Range Bolt Pattern Wheel Offset Range
2020 to 2024 Front (20x9.5) to (20x10.5) 5x112 +20mm to +30mm
2020 to 2024 Rear (20x10.5) to (20x11.5) 5x112 +16mm to +28mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The new Konig Hexaform wheels are another take on classic 6 spoke design. With a unique face that leaves plenty of room for upgraded calipers, these wheels are perfect for the track. Using Flow Forming Technology, Konig was able to reduce the overall weight of each wheel, while increasing tensile strength vs. standard cast wheels.

Key Features:
  • Offered in 15 and 18 inch sizes.
  • Available in Matte Black and Matte Bronze finishes.
  • Uses Konig's Flow Forming Technology, which results in a stronger, lighter, and more durable wheel when compared to a traditional cast design.

Konig Ampliform Wheel Hardware Information:
  • Center Caps: Included
  • Lug Nuts: Accepts small diameter "tuner style" aftermarket lug nuts only (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

 Narrow Down Selections By Your BMW 8 Series M8's Year
Application
(Clicking a link will change you to the given BMW 8 Series M8's year catalog)
Konig Hexaform Wheels for 2024 BMW 8 Series M8
Konig Hexaform Wheels for 2023 BMW 8 Series M8
Konig Hexaform Wheels for 2022 BMW 8 Series M8
Konig Hexaform Wheels for 2020 BMW 8 Series M8

  Don't have a BMW 8 Series M8?

Our Customers Love Us - See our Reviews
...Loading Reviews