A down arrow

SSR GTV02 Wheels for Nissan Sentra

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
Nissan Sentra
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(17x8, 5x114.3, 45mm, Flat Black)
Universal
(18x8.5, 5x114.3, 40mm, Flat Black)
Universal
(18x9, 5x114.3, 45mm, Flat Black)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 Nissan Sentra Fitment Help
Help narrow down what is shown.
Select your specific car using the Garage.
Jump to the Garage
For your Nissan Sentra the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Extra Wheel Size Range Bolt Pattern Wheel Offset Range
1991 to 1999 (14x5.5) to (17x7) 4x100 +35mm to +45mm
2000 to 2006 (14x5.5) to (18x7.5) 4x114.3 +38mm to +48mm
2007 to 2012 Standard, S (16x6.5) to (19x8) 4x114.3 +38mm to +48mm
2007 to 2012 SL, SR, SE R, Spec V (16x6.5) to (19x8) 5x114.3 +38mm to +48mm
2013 to 2016 (16x6.5) to (19x8) 5x114.3 +38mm to +48mm
2017 to 2024 (16x6.5) to (19x9) 5x114.3 +35mm to +50mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

One of SSR's more popular wheels, the GTV02 is among one of the best as well. This wheel shows off a unique square spoke design, that curbs into the lip. The GTV02 wheels use Flow Forming Technology to not only increase strength, but also lowers it's weight. Lightweight and strong, with sharp good looks, makes this wheel really stand out.

Key Features:
  • Available in Flat Black finish.
  • Flow Forming Technology to increase strength and lowering weight.
  • Strong 1 piece design.
  • JWL and VIA certified.

SSR GTV02 Wheel Hardware Information:
  • Center Caps: Included.
  • Valve Stems: Included.
  • Lug Nuts: Accepts standard aftermarket lug nuts (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

Our Customers Love Us - See our Reviews
...Loading Reviews